-
The task to complete the 600 square meters of workshop floor using 40mpa concrete 200mm thick slab.
-
Steel fixing double layer of reinforcing mesh RF82.
-
Footing with reinforcement tied into concrete slab with N12
-
Concrete apron formed and reinforced with RF82 double layer and N12 bar every 1.2 meters.
-
Compacting concrete using Poker Vibrator.
-
Apron formed and reinforcing ready for placement of concrete slab using 40mpa concrete 200mm thick slab.
-
Screeding the concrete flat; even and to the required level. Using an aluminium screed takes some practice.
-
Backing up agitator truck to concrete pump.
-
Crack control bars 1 meter in length paced every 400 mm along footing.
-
Setting out the wet areas.
-
Finishing may require three or four trowelling passes of the surface.
-
It is important to commence finishing at the right time.
-
Finishing concrete with trowelling machine and trowelling edges by hand.